Holly Springs, MS
Chain link fence installation in Holly Springs, MS
Holly Springs and the rest of Marshall County is acreage country, and on acreage the arithmetic is simple: chain link at roughly $18–$26 per foot is what lets you enclose a real yard instead of a small square. We install galvanized and black vinyl-coated mesh on homes, shop yards and outbuildings across the county.
$18–$26 per foot installed • Old fence torn out and hauled off • Posts driven about 40 inches • 2-year no-questions-asked workmanship warranty
What chain link costs in Holly Springs
Installed chain link generally runs about $18–$26 per foot installed, using the same estimator pricing we quote from. Long uninterrupted runs on open ground price toward the lower end; short runs with several gates sit higher. Gates are priced separately — $300 for a single walk gate and $600 for a double drive gate — and there is a $750 minimum job charge.
Tearing out an old fence, rock, slope and tight equipment access are the site conditions that most often change a number. You can price your own yard in a few minutes rather than waiting on a callback.
Chain link options we install
Heights
Four foot for pet containment and front-yard boundaries, five foot as the common middle, six foot where you want real deterrence around a back lot or a yard that stores equipment.
Galvanized or black vinyl-coated
Galvanized is the value option and the standard on job sites. Black vinyl-coated mesh costs more per foot but visually disappears against a treeline, which is why most backyards that back onto woods choose it.
Mesh gauge and framework
Residential work is typically 11 or 11.5 gauge mesh on residential-grade framework. Commercial and job-site fence steps up to heavier mesh and heavier pipe where hardware takes daily abuse.
Top rail or top wire
Top rail gives the fence a finished line and stiffens the run, and it is what we use on nearly all residential installs. Tension wire is the utility-yard approach where budget beats looks.
Gates sized to what you own
Walk gates and double drive gates are built to your mower, trailer or truck rather than to a standard kit width. A welded metal gate frame is available as an upgrade.
Slats and bottom wire
Privacy slats can be woven into chain link when you want screening without paying for a solid privacy fence, and bottom tension wire keeps a dog from pushing the mesh up along the ground.
Chain link on Marshall County property
Out here the fence usually has a job to do rather than a look to achieve — keeping dogs in and away from the county road, securing a shop yard or equipment, closing off the area around the house on a larger parcel. Chain link does all three at a price that still makes sense across long runs.
Ground conditions matter more than they do in town. Rock, slope and soft low spots all change how posts get set, and gate posts on a drive that a truck or a trailer uses daily get extra attention because they are what takes the abuse.
Drive gates get sized to the equipment you actually own — a tractor and a bush hog need a different opening than a pickup. We measure against your equipment instead of ordering a standard width.
How we build it
We lay the line off your survey, set terminal and gate posts first, then work the run so it stays straight and tight rather than sagging a season later. Posts are driven approximately 40 inches into the soil, and gate posts get the extra attention because they are what carries the daily abuse.
Old fence removal and haul-off is quoted with the job, a welded metal gate frame is available as an upgrade rather than standard, and every install carries our 2-Year No-Questions-Asked Workmanship Warranty. Permits and HOA submittals are something we can guide you through and provide drawings for — approval stays in the property owner's name.
Chain link questions from Holly Springs homeowners
How much does a chain link fence cost in Holly Springs, MS?
Roughly $18–$26 per foot installed. Long, straight runs on open ground price toward the lower end; short runs with several gates and corners sit higher. Gates are added separately — $300 for a walk gate, $600 for a double drive gate — with a $750 minimum job charge.
Do you fence acreage outside Holly Springs?
Yes. We regularly work across Marshall County, including properties outside the city where the run is measured in hundreds of feet rather than a suburban perimeter. Give us the approximate footage and we can talk through what it costs before anyone drives out.
Is chain link a good livestock fence?
Chain link is a containment and security fence, not a livestock fence. For pasture we would point you at post-and-rail or field fence instead. If you want dogs, a yard or a shop area secured, chain link is the practical answer.
Can you fence a shop or equipment yard?
Yes. Heavier framework, heavier mesh and drive gates sized for the equipment that goes in and out, with hardware chosen for daily use rather than occasional use.
What warranty comes with the fence?
Every installation is backed by our 2-Year No-Questions-Asked Workmanship Warranty. Call 662-806-7800 if you want to talk it through before you book.